The Paloma Tankless Hot Water System lets you set and change water temperature settings from different locations in your home.

All Digital Tankless models come with a detachable remote controller, and you can add more and have up to three. Use a
Bath Controller to lower shower and bath temperatures to just the right point for a perfect shower, and get added protection against scalding, too. Put the Main Controller in your kitchen or laundry room, and use it to set just the right temperature for your dishes or laundry. The electronic Digital Controllers allow you to tailor hot-water temperature to each specific need.

All Digital Tankless models also display troubleshooting diagnostic codes in the case of unit failure of any kind. If the Paloma ICAD System finds that combustion is falling outside set parameters, the control system initiates a series of corrective steps. The Display flashes "05", which is the error code for a ventilation issue, and an alarm beeps as long as the unit is in operation. If the unit shuts down because the corrective actions did not work, then the Display shows error code "13". Other error codes indicate the unit is not properly operating due to a partially closed gas shutoff valve, low LP gas levels, or inadequate ventilation. These are just some examples of how the error codes inform you and help troubleshoot service problems.

The ICAD is a sophisticated system that monitors and optimizes combustion in the firing chamber, providing protection against Carbon Monoxide.
Learn more.
Sae up to $300 Home Energy Improvement Tax Credit
Everyone claims that their product is greener but few take the next step. Paloma is taking that step; we're seeking a solution to a serious and difficult issue. Paloma is ready to meet the challenge.
Learn more.

With any water heater, the trick is to make certain that you don't run out of hot water. View a complete comparison of features and benefits. Learn more.
Copyright © 2005 - 2008 Paloma Industries, Inc. All rights reserved. | Privacy | Site Map